Several points for attention of spiral air duct fan deviating from three star bending machine

1. The operators of the air duct production line need to be familiar with the structure, function and utilization mode of the plate bending machine. They can operate only after the permission of the hard working management staff.

2. Check whether the safety device is complete before starting the machine.

3. During operation, it is strictly forbidden to put feet and feet on roller and transmission parts and workpiece.

4. After a break, the clutch should be set to neutral.

5. The cooperation of multiple students requires special instructions.

6. Overload is strictly prohibited.

7. The overturning reset of the up roll air duct production line's landing and overturning bearing and the misalignment of the upper roll must be carried out after the main drive is shut down.

8. Do not pile up work pieces and sundries in the garden, and keep the machine tool and garden clean all the time.

9. At the end of homework, the power supply should be blocked and the power box of air duct production line should be locked.